![\"\"](\"http:\/\/jamescockroft-001-site5.jtempurl.com\/wp-content\/uploads\/2021\/10\/20210918_104522.jpg\")
<\/a><\/figure>\n\n\n\nMajority of formwork removed, showing what the final wall will look like, with waterfall projecting out of wall (green strip). <\/p>\n\n\n\n
The blocks and plywood, on which the feature wall was built, are being left in place whilst the concrete cures to the full strength (approx. 28 days).<\/p>\n\n\n\n View from on top of the feature wall, which is quite a height without any water in the pool (3m!)<\/p>\n\n\n\n Technical room, with sloping room complete, with all plumbing through walls, ready to connect to pipes running to \/ from pool. The actual roof will be completed at a later stage and eventually tiled to match surrounding buildings. Ground level will be built up by approx. 700mm to the same height as retaining wall in photo, which will bury \/ hide all plumbing pipes.<\/p>\n\n\n\n That is all of the work complete for this trip and with four concrete pours completed, 26.5m3 in total, it has been a real success, despite the little setback and upset at the formwork giving way on the first attempt. Sail-shade posts can be seen in place, but they are…<\/p>\n<\/a><\/figure>\n\n\n\n<\/a><\/figure>\n\n\n\n<\/a><\/figure>\n","protected":false},"excerpt":{"rendered":"